VACUOPEEL™ is a multi-layer system (without adhesive or glue) used in vacuum forming - prepreg, hand laid and thermoplastics

VACUOPLEX - VACUOPEEL allow you to get exceptional time savings at every stage of the process:

• department of purchase and storage: only one product.
• production department: only one product for preparation and use.

A combination of 3 products, namely:

• sacrificial fabric;
• perforated film;
• absorbent layer.

Vacuum forming of composite materials involves the use of a certain amount of consumables that have an impact on production and quality. Some of these materials are laid out sequentially one by one, such as peel paper, perforated film, absorbent material and vacuum film. The standard procedure is to lay out each layer separately (eg, peel, perforated film, absorbent layer), which can be difficult, especially if molding is done on vertical surfaces.

This type of work can lead to a large overlap of materials on large products, or vice versa, it is possible to skip any layer. Overlapping materials can cause thin products to warp, creating weak spots, or can affect the porosity of subsequent layers. The omission of any layer can have a dramatic effect on the final properties of the molded product.

The Vacuopeel system is applied as a single complex and removed in two steps. In other words, when you remove the material after the curing process, you first remove the absorbent layer together with the perforated film, and then only the peel fabric: sometimes it is necessary to leave the peel fabric as a protective layer, for example, for subsequent processing, painting or other operations.

Vacuopeel can be removed twice after the curing process:

1. You remove the absorbent layer along with the perforated film.
2. You remove the sacrificial fiber when you need it.

Code	sacrificial fiber	absorbent layer	Perforation of release film	Application	Usage with resin
Vacuopeel PA90 PES340	PA90 Polyamide	PES340 340 g/m²	P	With carbonfiber	E,VE
Vacuopeel PA80 PES200	PA80 Polyamide	PES200 200 g/m²	P	Standard - economical	E,VE
Vacuopeel PA64 PES200	PA64 Polyamide	PES200 200 g/m²	P	Smooth surface	E,VE
Vacuopeel PES85 PES340	PES85 - полиэфир	PES340 340 g/m²	P	Phenolic resins	E, PH, EL
Vacuoplex PA85 PES340	PA85 Polyamide	PES340 340 g/m²	P	Structural connection	E,VE
Vacuoplex MP PA100 PES150	PA100 ST White Polyamide without stripes	PES150 150 g/m²	P	Prepreg	E,VE